Dual XDMA7650 Manual

A SERVICE OF

next previous

2

TYPICAL FRONT-LOAD DIN MOUNTING METHOD

REMOVAL KEYS

MOUNTING SLEEVE

XDMA7650 INSTALLATION

Preparation

Please read entire manual before installation.

Before You Start

•Disconnectnegativebatteryterminal.Consultaqualifiedtechnicianforinstructions.

•Avoidinstallingtheunitwhereitwouldbesubjecttohightemperatures,suchasfrom

directsunlight,orwhereitwouldbesubjecttodust,dirtorexcessivevibration.

Getting Started

•Removetrimringfromunit,

•Remove2transitscrewslocatedontopoftheunit.

•Insertthesuppliedkeysintotheslotsasshown,andslidetheunitoutofthemounting

sleeve.

•Installmountingsleeveintoopening,bendingtabstosecure.

•Connectwiringharnessandantenna.Consultaqualifiedtechnicianifyouareunsure.

•Certainvehiclesmayrequireaninstallationkitand/orwiring

harnessadapter(soldseparately).

•Testforcorrectoperationandslideinto

mountingsleevetosecure.

•Snaptrimringintoplace.