Dual XDMA761 Manual

A SERVICE OF

next previous

2

XDMA761

REMOVAL

KEYS

HEAD UNIT

MOUNTING SLEEVE

OPTIONAL REAR

MOUNTING SUPPORT

Please read entire manual before installation.

Before You Start

•Disconnectnegativebatteryterminal.Consultaqualifiedtechnicianforinstructions.

•Avoidinstallingtheunitwhereitwouldbesubjecttohightemperatures,suchasfrom

directsunlight,orwhereitwouldbesubjecttodust,dirtorexcessivevibration.

Getting Started

•Removetrimringfromunit.

•Remove2transitscrewslocatedontopoftheunit.

•Insertthesuppliedkeysintotheslotsasshown,andslidetheunitoutofthemounting

sleeve.

•Installmountingsleeveintoopening,bendingtabstosecure.

•Connectwiringharnessandantenna.Consultaqualifiedtechnicianifyouareunsure.

•Certainvehiclesmayrequireaninstallationkitand/orwiringharnessadapter(sold

separately).

•Testforcorrectoperationandslideintomountingsleevetosecure.

•Snaptrimringintoplace.

Preparation

TYPICAL DIN FRONT-LOAD MOUNTING METHOD