A SERVICE OF

logo

Open as PDF
next previous
2
XDMA6540 INSTALLATION
TYPICAL FRONT-LOAD DIN MOUNTING METHOD
Please read entire manual before installation.
Before You Start
•Disconnectnegativebatteryterminal.Consultaqualifiedtechnicianforinstructions.
•Avoidinstallingtheunitwhereitwouldbesubjecttohightemperatures,suchasfrom
directsunlight,orwhereitwouldbesubjecttodust,dirtorexcessivevibration.
Preparation
Removal Keys
Head Unit
Mounting Sleeve
Dashboard or Installation Kit
Getting Started
•Removetrimringfromunit.
•Insertthesuppliedkeysintotheslots
asshown,andslidetheunitoutof
themountingsleeve.
•Installmountingsleeveintoopening,
bendingtabstosecure.
•Connectwiringharnessand
antenna.Consultaqualified
technicianifyouareunsure.
•Certainvehiclesmayrequirean
installationkitand/orwiring
harnessadapter(soldseparately).
•Testforcorrectoperationandslide
intomountingsleevetosecure.
•Snaptrimringintoplace.