xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
DES-6500:4#create snmp view dlinkview 1.3.6 view_type included
Command: create snmp view dlinkview 1.3.6 view_type included
Success.
DES-6500:4#
delete snmp view
Purpose Used to remove an SNMP view entry previously created on the
Switch.
Syntax
delete snmp view <view_name 32> [all | <oid>]
Description
The delete snmp view command is used to remove an SNMP
view previously created on the Switch.
Parameters
<view_name 32> − An alphanumeric string of up to 32 characters
that identifies the SNMP view to be deleted.
all − Specifies that all of the SNMP views on the Switch will be
deleted.
<oid> − The object ID that identifies an object tree (MIB tree) that
will be deleted from the Switch.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete a previously configured SNMP view from the Switch:
DES-6500:4#delete snmp view dlinkview all
Command: delete snmp view dlinkview all
Success.
DES-6500:4#
show snmp view
Purpose Used to display an SNMP view previously created on the Switch.
Syntax
show snmp view {<view_name 32>}
Description
The show snmp view command displays an SNMP view
previously created on the Switch.
Parameters
<view_name 32> − An alphanumeric string of up to 32 characters
that identifies the SNMP view that will be displayed.
Restrictions None.
Example usage:
To display SNMP view configuration:
DES-6500:4#show snmp view
36
