38
DI-634M User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
The Ping Test is used to send Ping packets to test if a computer
is on the Internet. Enter the IP Address that you wish to Ping,
and click Ping.
Click Reboot to restart the DI-634M.
If you choose to block WAN Ping, the WAN IP Address of
the DI-634M will not respond to pings. Blocking the Ping may
provide some extra security from hackers.
Discard Ping from WAN side: Click Enabled to block the WAN
ping.
The DI-634M supports VPN (Virtual Private Network) pass-
through for both PPTP (Point-to-Point Tunneling Protocol) and
IPSec (IP Security). Once VPN pass-through is enabled, there
is no need to open up virtual services. Multiple VPN connections
can be made through the DI-634M. This is useful when you
have many VPN clients on the LAN network.
Click Enabled to allow multicast traffic to pass through the
router from the Internet.
Ping Test:
Restart Device:
Block WAN Ping:
VPN Pass
Through:
Multicast
streams:
