Pneumatic Actuator Features & Specifications
Pinion
Electroless Nickle Plated Carbon
Steel for maximum corrosion and
wear resistance. Anti-blowout
design.
Pistons
Die-cast aluminum alloy fitted
with Nylon bushing guides
and Buna –N seals.
Solenoid Interface
International NAMUR
solenoid mounting interface
is standard on all units.
Body
Extruded hard anodized
aluminum alloy for wear and
corrosion resistance and
reduced friction.
Indicator
A high visibility polyethylene for
Open / Close indication is
standard on all models
Heavy Duty Springs
High tensile steel
springs with retainer
and guide for safe and
easy assembly.
End Caps
Epoxy-coated die-cast
aluminum alloy for
maximum resistance to
corrosive environments.
Specifications
Operating Pressure Range 40 – 120 PSIG
Maximum Allowable Working Pressure 150 PSIG
Operating Media Dry or lubricated non-corrosive gas
Operating Temperature Standard -40˚ F to +200˚ F
Piston and pinion lubrication Shell Darina R2
Range of rotation adjustment Between 80˚ and 100˚
Valve & Accessory Mounting Standard ISO 5211 bolt patterns
Output shaft Female – Double Square
Design Twin Rack & Pinion
Factory testing cycles 1 million
Rotation Adjustment
A full ±5˚ of travel adjustment in
the open and
closed positions.
Standard on all sizes.
