• Locate the OBD-II diagnostic port on your vehicle. (see reference pictures on page 2)
• Connect the Predator into vehicle’s diagnostic port and turn the ignition key to ON position (DO NOT start the engine) The
following screen will be displayed: (If Predator does not turn on, please check the cigarette lighter fuse).
NOTE: FOR CORVETTE - Make sure vehicle is in “Accessory Mode”. With keys in vehicle, the “Start” button lights up green. Press “ACC” on
the Start button once. An orange LED should illuminate on the Start button and the green light should turn off. The instrument cluster message
center will display “Accessory Mode”.
*****Predator v.xrxx*****
Performance Tune
Diagnostics
Options
Predator v.xrxx
Performance Tune: This will take the user through the
process of programming and modify
ing the tune for the vehicle.
Diagnostics: This will take the user through scanning
or erasing fault codes and monitoring
live data.
Options: This contains tool options and trouble
shooting menus.
Note:
To view current tune in vehicle, go to “Options” and select “Show Last
Tune Written”. This will display last tune uploaded from Predator.
Press ESC
to go to the
previous
page during
procedures.
Installing the DiabloSport tune into a vehicle
10
Installing the DiabloSport
tune into a vehicle
