DeviceNet Network Scanner DVPDNET-SL
DVP-PLC Application Manual
8
Open the DIN rail clip on DVP-SV and DVPDNET-SL. Insert DVP-SV and DVPDNET-SL onto the DIN
rail.
Clip up the DIN rail clips on DVP-SV and DVPDNET-SL to fix DVP-SV and DVPDNET-SL on the DIN rail,
as shown below.
DVPDNET
35mm DIN rail
DVP28SV
RUN
STOP
3.3 Connecting to DeviceNet Connection Port
The colors on the PINs on the DeviceNet connection port match the colors of the connection cables.
Make sure you connect the cable to the right PIN.
We recommend you also apply Delta’s power module in the connection.
4 Configuration
4.1 Corresponding Relation between DVPDNET-SL and DVP-SV
After all DVPDNET-SL are connected to DVP-SV, DVP-SV will distribute data mapping areas to every
DVPDNET-SL.
DVPDNET DVP28SV
RUN
STOP
DVPDNETDVPDNETDVPDNETDVPDNETDVPDNETDVPDNETDVPDNET
The index of DVPDNET-SL is its number. The first DVPDNET-SL on the left hand side of DVP-SV is No. 1,
the following DVPDNET-SL modules are No.2, No.3, No.4 and so on.
