CyberData 010844 Manual

A SERVICE OF

next previous

23

Operations Guide 930095D CyberData Corporation

3 Mounting the Speaker

3.0 Mount the Speaker

Before you mount the speaker, make sure that you have received all the parts for each speaker. Refer

to

Table 3-1 and Table 3-2.

To mount the speaker:

1. Use the TEMPLATE to cut the speaker hole and prepare holes for the screws (Figure 3-1). This

template is located on the back page of the Installation Quick Reference that is delivered with each

speaker.

Table 3-1. Drop Ceiling Mounting Components (Part of the Accessory Kit)

Quantity Part Name Illustration

3 #8 Nylon Thumb Nuts

3 #8 Fender Washers

3 8-32 x 1 1/4" Mounting Screws

Table 3-2. Drywall Mounting Components (Part of the Accessory Kit)

Quantity Part Name Illustration

3 Plastic Ribbed Anchors

3 #6 Sheet Metal Screws