4. Operating Instructions 8 1/13/2011 5:38 PM
4. OPERATING INSTRUCTIONS
Access control panel functions using the four buttons located directly underneath the LED display.
UTTON
UNCTION
<MODE>
Used to scroll through the current
operating mode, as well as back
out of the current menu option
<UP>
Used to select a increasing value
<DOWN>
Used to select an decreasing
value
<ENTER>
Used to activate a selection and
store it to memory
DMX Mode
d001~d512 Select the DMX starting address
Operation
Slave
Invert
Invert the operation (pod 1 becomes pod 6)
Select YES to activate this function
Sound-active
SoUd rUn
Trigger the built-in program to the beat of the
music, using the internal microphone
Automatic
P-
Trigger the built-in programs with variable
Select one of the built-in programs
Adjust the speed of the automatic program
Configuring the Starting Address
The 6SPOT™ fixture uses up to eight DMX channels.In this DMX configuration/personality, the
highest configurable address is 505. Any address higher than this will prevent access to all of the
channels while in this mode; however, if you desire to use one of the other DMX configurations
(personalities), please consider the total DMX channels when selecting a DMX address.
If this is your first time using DMX, we recommendreading the “DMX Primer” section in the
