Shooting
63
Locking the Flash Exposure Setting (FE Lock)
You can adjust and lock the flash output to suit a specific portion of
the subject.
• Turn on the LCD monitor.
• Set the flash to
and focus on the
part of the subject on which you wish
to lock the flash exposure setting.
• Press the shutter button halfway and
wait until two beeps sound.
• Keep the shutter button pressed
halfway and press the
button.
• The icon will display.
• The flash will fire a pre-flash and lock
the flash exposure to the required
intensity to illuminate the subject.
• Re-aim the camera to compose the shot
and press the shutter button all the
way.
• To release the FE lock, press the
button.
• The FE lock may release if you press any button other than
the
button.
*EC118usCUGE_062-077,GM 2/25/02, 2:48 PM63
