[1] Entrance Section (See page 1-4).
[2] Horizontal Transport Section (See page 1-5).
[3] Left Turn-Over Section (See page 1-6).
[4] Offset Section (See page 1-7).
[5] Right Turn-Over Section (See page 1-8).
[6] Stacking Section (See page 1-9).
[7] Top Cover-OUTPUT TRAY Section (See
page 1-10).
[8] Control Panel (See page 1-10).
[A] Power Switch
[B] Stack Status LED
Lit :Stacker is full.
Blinking :Stacker is operating.
[C] Front Cover Open Button (and LED)
Lit: Cover unlocked.
Blinking: Stack tray is moving up or down.
[D] Downstream Exit Section (See page 1-11).
[E] Handle
Use this handle to remove sheets from the
stacking section.
[F] Front Cover
Press the front cover open button to open.
When the machine is running, press the but-
ton and wait until the lamp lights up, and
then open the cover.
[G] Power Cable
[H] Circuit Breaker
OFF
ON
