67
When [Find network] is selected, a list of active access points nearby
is displayed, accompanied by information about them. Select the SSID
(or ESS-ID) of the access point to connect to.
1
Select [Wi-Fi function].
Under the [53] tab, set [Wi-Fi] to
[Enable], then select [Wi-Fi
function].
2
Select an item.
Select either [q] [D] [l] or [ ],
then press <0>.
3
Select [Infrastructure mode].
Displayed when [q] or [l] is
selected. Go to step 4 when selecting
[D] or [ ].
Press the <V> key to select
[Infrastructure mode], then press
<0>.
Select [OK] and press <0> to go to
the next screen.
4
Select [Find network].
Press the <V> key to select [Find
network], then press <0>.
Select [OK] and press <0> to go to
the next screen.
Manual Connection by Searching Networks
Selecting the Wireless Network
