Sending a Confidential Document
7-14
Using Confidential Mailboxes
7
CF-PL Facsimile Guide_USEN HT1-2188-000-V.1.0
4
Press [▼] or [▲] until <1.CONFIDENTIAL TX> appears ➞ press
[Set].
5
Dial the telephone number ➞ press [Set].
You can specify the destination using regular dialing, one-touch speed dialing,
coded speed dialing, access code dialing, or directory dialing. (See “Using
Regular Dialing,” on p. 3-8, “Using Speed Dialing,” on p. 2-32, or “Using
Directory Dialing,” on p. 2-39.)
NOTE
• You can dial only one number.
• You can select only the one-touch speed dialing key or coded speed dialing code
whose transmission mode is set to ‘REGULAR TX’.
6
Enter the ITU-T subaddress using the numeric keys ➞ press
[Set].
NOTE
You must enter the correct subaddress, including , #, and spaces, set on the
other party’s machine. Otherwise, your machine cannot start sending your
confidential documents.
7
If an ITU-T password is also required, press [Password].
Otherwise, proceed to step 9.
➞
➞
➞
Set
4
1
7
5
2
8
6
3
9
0
Set
4
1
7
5
2
8
6
3
9
0
Set
Password
