Ground Light Assembly
Step 1
Assemble one or two ground stake
sections, as desired. Attach the
ground stake to a pointed
connector. Push approximately 3"
of the ground stake into the
ground.
NOTE: Ground can be softened by
soaking area with water first.
Step 2
Attach light head to ground stake
adaptor by inserting tabs on
adaptor into slots in bottom of light
head. Twist adaptor clockwise to
fasten.
Step 3
Insert light head into ground stake.
The photocell light sensor should
point away from other nighttime
light sources.
Step 4
For optimum performance, it is
best to charge the solar light for a
FULL, SUNNY DAY. The light will
turn on automatically at night. The
Ni-Cd rechargeable battery
provides increased brightness and
stays on longer as it cycles over
time (days and nights of charging
and discharging). The more direct
sunlight that the light receives
during the day, the brighter and
longer the light will stay on at
night.
4
Photocell
Sensor
