Step 1
To form a hanger for the solar light,
connect the hook section with one or two
stand sections, depending on the height
desired.
Step 2
Locate an area of solid ground where you
can place your solar lights and insert
ground stand.
Step or press down on ground stand to
aid in driving stand into ground. Make
sure ground stand is inserted all the way
into ground.
NOTE: Ground can be softened by soaking
area with water first.
Step 3
Once ground stand is firmly in place,
insert hanging hook into center hole of
ground stand.
Step 4
Hang light fixture from hanging hook.
The photocell light sensor should point
away from other nighttime light sources.
Step 5
For optimum performance, it is best to
charge the solar light for a FULL, SUNNY
DAY. The light will turn on automatically
at night. The Ni-Cd rechargeable battery
provides increased brightness and stays
on longer as it cycles over time (days and
nights of charging and discharging). The
more direct sunlight that the light
receives during the day, the brighter and
longer the light will stay on at night.
Ground Stand
Hook Section
Hanging Hook
Ground Stand
Stand Sections
OPERATING INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE OPERATING YOUR SOLAR LIGHT.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
3
Hanging Light Assembly
