Document: - page 12 (Black)
Screen angle and frequency: 45.0000, 150.0000
12
MAINTENANCE
CHANGING OIL & CHECKING LEVEL
1. Change oil while engine is OFF but still warm,
ensure fuel cap is tightened securely.
2. Remove dipstick, and drain
oil in direction shown.
3. Place engine level. Remove dipstick. Using oil
measure cup pour oil slowly adding 0.5 oz. at a
time. Do not overfill.
CAUTION:
Used oil is a hazardous waste product. Dispose of
used oil properly. Do not discard with household
waste. Check with your local authorities, service cen-
ter, or dealer for safe disposal/recycling facilities.
Note: Engine holds approximately
3 oz. (90 ml.).
4. Recheck oil level. Remove dipstick and wipe clean
with cloth. Tighten dipstick down. Remove and
check oil level.
5. Replace dipstick tightly before starting engine.
1 ounce
0.5 ounce
OIL FILL
