146n
The onboard tool kit is located in the
luggage compartment, under the floor
mat.
Z3 coupe, M coupe:
Grasp the floor mat by the straps on the
left and right. Pull it upward and remove
it.
Z3 roadster, M roadster:
Lift the floor mat from the rear by the
strap and fold it forward.
Front
1 Position the wipers vertically. To do
this, switch on the wipers and switch
off the ignition when the wipers are
approximately vertical.
2 Raise the wiper arm completely.
3 Press the spring retainer (arrow) and
extract the blade, pulling toward the
wiper arm.
4 Insert a new wiper blade and apply
pressure until you hear it engage.
365de097
Rear window wiper, Z3 coupe,
M coupe
Follow the same procedure as that
described for changing the front wiper
blades, except that the wiper does not
have to be positioned vertically.
Fold the wiper back onto the win-
dow before you turn the ignition
key to position 1 or 2.<
Use only wiper blades which have
been approved by BMW.<
Onboard tool kit Windshield wiper blades
Online Edition for Part-No. 01 41 0 155 149 - © 08/99 BMW AG
