72n
Digital clock, Z3 coupe Analog clock, Z3 roadster
The display is provided at ignition key
position 1 and above. In ignition key
position 0 and when the vehicle lighting
is off, the display is not illuminated.
After a power loss, 0:00 appears in the
display.
Time entries are made with the key
for setting the hour and with the
key for setting the minutes.
Each time a key is pressed, the display
is increased by one. Holding down the
key starts the rapid advance. The time
begins to run exactly on the second
each time is pressed.
367us080
Z3 cou
e
To correct the time:
Depending on the correction, press the
key for hours or the key for
minutes.
Switching the time display into the
12 or 24-hour mode:
If you press the and keys si-
multaneously, the display converts from
the 12-hour mode to the 24-hour mode.
When you select the 12-hour mode, AM
or PM will appear to the right of the
time.
You can correct the time by pressing
the buttons (arrows) with a sharp object
such as a ball-point pen.
Set the clock forward by pressing the
right button; set the clock back by
pressing the left button.
Online Edition for Part-No. 01 41 0 155 149 - © 08/99 BMW AG
