PREPARATIONS BEFORE OPERATION
– 9 –
Connect to a Mobile Amplifier Turn off all the equipment before connections.
Connect to a TravelPilot DX-N Navigation System Turn off all the equipment before connections.
In the connection diagram, the system’s power leads should be connected at the same point to minimize noise.
■
This schematic describes the installation of an After
Market video source, such as VCR, DVD, TV Tuner, or
Video Game, connected to a Blaupunkt DX-N
Navigation System through a Blaupunkt Video
Converter, P/N 7 607 005 718. The Video Converter is
necessary to convert the source’s video signal into a
usable format for the DX-N.
■
Signal connections include: (a) RCA connection from
the video source’s output to the converter’s input, (b) 15
pin serial connection between the converter' s output
and the DX-N ROM 15 pin input, and (c) DX-N ROM
connection to the DX-N screen, using the supplied
video cable.
■
Note: When using a gooseneck mounting adapter, P/N
7 612 001 204, the supplied cable will take the place of
the DX-N monitor cable supplied with the DX-N
package.
■
Note: Video source audio connection can be made via
RF modulator to any factory radio or via RCA cable
through an After Market radio if an auxiliary input is
available.
