![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/4/3d/43dfd2e6-bb90-4f07-b62d-7c171542b21b/43dfd2e6-bb90-4f07-b62d-7c171542b21b-bg44.png)
1999 BERNINA Of America
Section D - page 8
2-THREAD ROLLED HEM
Instruction Manual
pg.___
Bernette Advanced Guide Workbook Supplement I
pg.___
Serger Library – Tips and Tricks
•Attach the Upper Lopper Converter.
•Following the directions found in the Instruction Manual on page___, thread
for a 2-thread Rolled Edge.
•Turn the Stitch Selection Dial to “A”.
•Set Stitch Length to 1.75.
•Pull the Stitch Selection Lever/Rolled Hem towards you.
•Adjust Cutting Width to 2 (normal).
•Place the fabric under the Presser Foot and serge one 6” edge cutting off
about
1
/
8
” as you serge.
•Return the Stitch Selection Lever/Rolled Hem to normal sewing position (away
from you).
• Press, trim, and mount the sample.
FABRIC: Batiste 3” X 6”
NEEDLES: 70/10 Sharp or Microtex
THREAD: 2 cones of Metrolene serger thread
PRESSER FOOT: Standard