Introduction 9
Remote Control Description
Your Remote Control at a Glance
Remote Control Effective Range
The remote sensors are located on the front and the back of the projector. It can function in
a range of 30 degrees horizontally and 30 degrees vertically relative to a line that is a right
angle to the remote sensors. The distance between the remote control and the remote
sensors must be shorter than 6 meters (19.5 feet).
Remote Control Functions
1. POWER, SOURCE, AUTO, BLANK, 3,4, EXIT, MENU
The functions of these buttons are the same as those on the external control panel. Please
refer to "External Control Panel" on page 7 for more information.
2. KEYSTONE
If the image is trapezoid after adjusting the projection offset, press KEYSTONE + OR
KEYSTONE - to correct distorted image.
3. FREEZE
The image can be frozen when FREEZE is pressed. An icon will appear in the lower
right corner of the screen. To release the freeze function, press the FREEZE button again.
POWER
KEYSTONE
AUTO
Left / Right
PIP SOURCE
SOURCE
EXIT
BLANK
PRESET
MENU / Down
FREEZE
PIP POSITION
