Operation 65
Function Description
Network
Settings
Wired LAN
Wireless LAN
Remote Desktop
Projection Log In Code
Broadcasting
See "Using the broadcasting function" on page 52 for details.
AMX Device Discovery
When AMX Device Discovery is On, the projector can be detected by
AMX controller.
Mac Address
Displays the mac address for this projector.
The System limitation of 1:1 audio is Intel Pentium 4, 3.0G CPU, 1G
RAM.
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: Phase, H. Size, User 1, User
2, Color Space Conversion, Language, Projector Position, High
Altitude Mode, Security Settings, DHCP, SSID, Remote Desktop and
Baud Rate.
Current
System
Status
Source
Shows the current signal source.
Picture Mode
Shows the selected mode in the PICTURE menu.
Resolution
Shows the native resolution of the input signal.
Color System
Shows input system format: NTSC, PAL, SECAM, YUV, or RGB.
Equivalent Lamp Hour
Displays the number of hours the lamp has been used.
Firmware Version
Shows the firmware version of your projector.
5. SYSTEM SETUP: Advanced menu
