INSTALLATION
“Install New Hardware Wizard” may prompt you to
provide your Windows Installation CD to complete the
driver installation process).
Important Note: Hi-Speed USB hub drivers are included
with most USB 2.0 PCI upgrade cards, and are pre-installed
along with the PCI card drivers. If you purchased an
upgrade card prior to the release of Hi-Speed USB hub
support, please check with your PCI card vendor for an
updated USB 2.0 driver. The Belkin Hi-Speed USB driver
supports all competitive cards based on the NEC host
controller with the exception of Adaptec. The most recent
Belkin driver is available at www.belkin.com.
3. Plug the USB A connector of the USB device, or an
additional hub, into any of the downstream ports of
the Hub (see Fig. 2).
Important Note: When plugging a USB device into the
Hub for the first time, it may be necessary to reinstall the
USB drivers for that device. Likewise, if you move the
device to another port on the Hub, it may be necessary to
reinstall the drivers.
5
USB-A Connector
Figure 2
P74081-A_F5U217_man_10-02.qxd 10/17/02 11:42 AM Page 5
