1) Make the connections to the vehicle for the 12 pin wiring harness.
2) When connecting an AV Component, insert the Circular Mini-Din Connector of the source compo-
nent harness through the wire tie loop on the main PCB and into the Mini-Din Connector on the
main PCB. Pull the wire tie loop tight and cut off the excess.
3) Connect power harness to vehicle electrical system by tapping into an accessory hot line, con-
stant battery line and also a ground.
4) Connect 8 pin wiring harness from video monitor to the mating connector on FM Modulator.
5) Connect the FM Modulator to the Vehicle Radio.
6) Mount and connect the Television Antenna (sold separately).
7) Verify all functions of the System before final mounting of the finished assembly.
A/V Source Definitions:
1= TV Tuner
2= AV1 input (VCP, game or future DVD, etc)
3= AUX input (VCP, game or future DVD, etc)
4= Built -in DVD
-6-
VOD808
1
TV antenna
(If applicable)
12 Pin Power si
nal
Harness
Accessory
Harness
8 Pin Modulator
Hardness
LEFT
WHITE
RIGHT
RED
TO
OPTIONAL
ADDITIONAL
MONITOR
RCA-Female
Patch Cord
RCA Male to Male
12 VDC Power and Ground
Auxillary
video display
INPUT
VIDEO
LINE
OUT
VIDEO
To Secondary AV Monitor
Choke
Power Harness
Red: +12VDC
(Accessory Cir.)
Black: Ground
Optional Remote Headphone Stations
Stereo
Headphone Jack
Stereo
Headphone Jack
Green
(Right+)
Black
(Ground)
Gray
(Left+)
DC 12V
CH-3
CH-4
12 5V 2A
Mini-Din Connectors
Red RCA (Audio Right)
White RCA (Audio Left)
Yellow RCA (Video)
Out
Power Connector
4 Pin
“Y’ Adapter
for use with
Installations
IR LED:
Clean the IR
Receiver Window
on the front of
the VCP.
Remove Adhesive
Backing and
Apply IR LED
to IR Window
on the Face
of the VCP.
FM
Modulator
Am/Fm
Antenna
Dash Radio
Car Audio In
L/R
Male (white)
RCA Jack
Male (red)
RCA Jack
FM Modulator
TO
FACTORY
RADIO
S
o
l
d
S
e
p
e
r
a
t
e
l
y
Hard Wired FM Modulator Output
For Receivers with Low Level Audio Input
Battery
Dome Light Connection.
Refer to connecting the
Dome Light.
Audio Input
For Audio Source with
Low Level Output
(Ex. Satellite Radio)
Audio Output
