15
TELEPHONE OPERATION
AT THE BASE
Volume
Adjust the volume of what you hear on a call using VOLUME + and -
— OR —
1 During a call, press .
2 Use the softkeys to adjust the volume of what you hear.
3 Press to save the setting for future calls.
Mute
Mute allows you to hear your caller, but prevents the caller from
hearing you. Use M on the base
— OR —
1 Press . The screen alternately displays MICROPHONE
MUTED and the previous screen.
2 Press again to return to your conversation.
Hold
When you put a call on hold, you cannot hear your caller, and your
caller cannot hear you.
1 Press . The screen displays CALL ON HOLD
2 Press the appropriate LINE button, K or h to return
to the call.
NOTE: The base rings to remind you that the call is being held.
If you don’t answer the ring, the call is disconnected.
Line in Use
• When the line is in use at the base, the
base screen display is similar to:
• When the line is in use by another set on
the same line, the screen displays:
HOLD
MUTE
MUTE
OK
VOL
LINE1
IN USE
RDL MENU MEM
0
VOL HOLD MUTE
