7, Feedback commands (from a controller)
The 8 ASCII feedback commands are send after receiving the command from a controller
Item Command Function Description
1 Power on Responses the system power.
On command to the controller
2 Power off Responses the system power.
Off command to the controller
3 Channel 1 updated Changes the 1
st
output signal.
xx is the selected source
4 Channel 2 updated Changes the 2
st
output signal.
xx is the selected source
5 Channel 3 updated Changes the 3
st
output signal.
xx is the selected source
6 Channel 4 updated Changes the 4
st
output signal.
xx is the selected source
7 Lock on Is locked on
8 Lock off Is released
9 Reset Responses the reset command.
10 Status asknowledge Responses the ask status
Command to the controller
Remark: The device responds to one feedback command for every request except the
<SBASKATA> . After the device receives <SBASKATA>, it will send the 10th, 1/2th, IN/OUT
state, 7/8th command sequentially.
Note: Responses IN/OUT state command: SBUD0000XXYY
input port XX=> (01, 02, ..., 06)
output port YY=> (01, 02, ..., 06)
6
