A SERVICE OF

logo

- 10 -
IR Remote Control
No. Component Function
1 Port Up / Port
Down Buttons
Press the Port Up button to cycle forward
through the source devices (1 to 2; 2 to 3; ... 8
to 1).
Press the Port Down button to cycle backward
through the source devices. (8 to 7; 7 to 6; ... 1
to 8)
2 Port Selection
Buttons
Press a button to bring the focus directly to the
source device attached to its associated port.
3On / Off
Button
This button enables / disables the video
output.
Note: If video output is disabled, the
corresponding port LED will flash until video is
re-enabled.
1
2
ON / OFF
3