Chapter 1. Introduction
9
Rear View (DC Power)
No. Component Description
1 Power Switch This is a standard rocker switch that powers the KL1100 on
and off.
2 External
Console Section
For flexibility and convenience, the KL1100 supports an
independent, external, KVM console. The external console's
keyboard, monitor, and mouse cables plug in here.
3 KVM Port
Section
The cable linking the KL1100 to a computer or switch plugs in
here.
Note: The shape of this SPHD connector has been
specifically modified so that only KVM cables designed to
work with this console can plug in (see External Console,
page 3 for details). Do NOT attempt to use ordinary 15 pin
VGA connector cable to link this port to a computer or switch.
4 DC Terminal
Block
The electric leads from a DC power supply connect here.
kl1100.book Page 9 Friday, October 29, 2010 2:54 PM
