22
■ Output power
The UPS continuously monitors the power consumed by the load. The
value given is a percentage of the full load rating of the UPS. This informa-
tion may be logged using UPS monitoring software, plotted using a spread-
sheet application, and used to track load usage over extended periods.
■ Output voltage, internal temperature, battery voltage, battery capacity
The UPS continuously monitors the rms output voltage, internal tempera-
ture (°C), battery voltage, and the remaining battery capacity as a percent-
age of the fully charged condition. This information is valuable for
troubleshooting.
5.6.3 Power management
■ Shut down
While the UPS is operating on-battery, you may direct it to shut down after
a user-specified delay. Controlled shutdown of the UPS conserves battery
capacity and helps to extend battery life.
■ Shut down with delayed restart
You may direct the UPS to shut down in any mode following a user-
specified delay, and then restart after a user-specified interval. The restart
delay may be used to stagger the power-up of multiple network servers
protected by multiple UPSs.
■ Simulate power failure
You may direct the UPS to simulate a power failure by briefly operating
on-battery. This function is useful for test purposes.
■ Turn off
You may direct the UPS to turn off immediately, or after a user-specified
delay.
5.0 Operation
