AL5068S Designer’s Guide
No. AL5068S-E00-105 Altec Electronic AG Seite 6 / 25
1.3 Features
• D-Channel Protocols:
- DSS1
- X.31 (D-Channel)
• B-Channel Protocols:
- HDLC transparent
- PPP async-sync (RFC1662)
- X.75,
- V.120
- V.110
- X.31, X.25
• ISDN S0 (I.430) Interface.
• Several Dial Procedures:
- AT commands
- Auto Connect
• X.3 PAD intergrated.
• Command Interpreters with standard AT Commands
• Trace Log Buffers.
• Caller ID access control.
• Firmware updatable
• Optional analog voice interface
• Programmable EAZ / MSN
• Advice of charge
• Hardware-based ISDN modem controller.
• Worldwide operation
- Complies to CTR3 and other country requirements
• Built-in host / DTE interface with speeds up to 230.4 kbps
- Serial ITU-T V.24 (EIA/TIA-232-E) logical interface.
• Flow control (RTS/CTS) and speed buffering
• Automatic format + Speed sensing
• +3.3V / +5V DC Operation.
• Typical power use: 130 mW (Normal Mode)
• Compact size (64.5 x 26.5 mm)
• EMC approved according EN50081, EN55082, EN55022, EN55024
• Safety approved according EN60950 :2001
• Network approved according TBR3
• 2 Years warranty.
1.4 Command Sets and S-Registers
Modem operation is controlled by AT and S-Register Commands issued by the DTE.
Refer to the AT commands for the AL5068S Reference Manual
