Alcatel-Lucent 1850 TSS-160 Manual

Open as PDF

next previous

Alcatel-Lucent 1850 TSS-160 | Release 3 | Data Sheet 3

Ethernet forwarding criteria

•Port

•PortplusMAC

•PortplusVLAN

•PortplusMACplusVLAN

•PortplusMACplusVLANplus

Prio bits

•Unicasttraffic

•Multicasttraffic

•Broadcasttraffic

IGMP functionality

•InternetGroupManagement

Protocol(IGMP)snooping

•IGMPproxy

•IGMPfastleave

ATM functionality

•Pseudo-wireemulationedgeto

edge(PWE3):ATM-PWE3gateway

•OC-3/STM-1ATMunchannalized

•ATMvirtualpathidentifier/virtual

channelidentifier(VPI/VCI)

N:1mappingwithPWE3static

configuration

•ATMQoS,OAMF4,F5:PWEOAM

T-MPLS functionality

•Dataplane:T-MPLS,MPLS

•T-MPLSOAM:CV,automaticpro-

tection switching (APS), forward

defect indication (FDI)

•TunnelLinProtection1:1

•Ethernetline(E-line),E-LAN

and E-Tree

SONET/SDH functionality

•Cross-connection

•Termination

•EthernetmappingoverSONET/SDH

¬Genericframingprocedure:

GFP,G.7041

•Virtualconcatenation(VCAT)

•Linkcapacityadjustmentscheme

(LCAS)

•Performancemonitoring

•HOandLOcapabilities

DWDM functionality

•Nodeconfigurations

¬ Terminal

¬ In-line amplifier (ILA)

•Networkconfigurations

¬ Point-to-point

¬ Linear

¬ Ring

¬ Mesh

Protection

•Ethernetnetworkprotection

¬RSTP:802.1w

¬MSTP:802.1s

¬ Link aggregation

•T-MPLSnetworkprotection

¬TunnelLinProtection1:1

•SONET/SDHnetworkprotection

¬Single-anddual-endedAPS1+1

¬ Subnetwork Connection

Protocol (SNCP), unidirectional

path-switchedring(UPSR)

¬ Multiplex Section-Protection

Ring(MSPRING)2Fbidirectional

lineswitchingring(BLSR)

•Equipmentprotection

¬ Power protection

¬ Controller protection

¬Universalswitchprotection

G-MPLS control plane

•T-MPLStunnelsetup

•TDMHOpathsetup

Management

•Alcatel-Lucent1350Optical

Management System (OMS)

• TL1

• Zero-installationcraft(ZIC)terminal

•Commandlineinterface(CLI)

•SimpleNetworkManagement

Protocol (SNMP)

•SecureShell(SSH)v2/Secure

Sockets Layer (SSL) for secure

connection

Physical specifications

ANSI

Dimensions: Alcatel-Lucent 1850

TSS-160 subrack

•Subrackdimensions

¬Height:304mm(12.0in.)

¬Width:498mm(19.6in.)

¬Depth:305mm(12.0in.)

or 356 mm (14.0 in.)

•Designedtobeinstalledina

standard ANSI rack

¬Height:2.13m(7.0ft.)

¬Width:660mm(26.0in.)

¬Depth:305mm(12.0in.)

or 356 mm (14.0 in.)

Power and cooling

•Powersupply:DCfeed(-48-VDC

nominal)

•Powersupply:-58-V

•Powerconsumption:upto2000W

•Cooling:forcedair

Environment

•Operatingtemperature:

-5°Cto+45°C(23°Fto113°F)

•Relativehumidity:0%to90%,

non-condensed

Regulatory compliance

•CEandULcertification

•NEBSlevel3

•FCCpart15classA

ETSI

Dimensions: Alcatel-Lucent 1850

TSS-160 subrack

•Subrackdimensions

¬Height:304mm(12.0in.)

¬Width:498mm(19.6in.)

¬Depth:290mm(11.4in.)

•Designedtobeinstalledina

standard ETSI rack

¬Height:2.20m(7.2ft.)

¬Width:600mm(23.6in.)

¬Depth:300mm(11.8in.)

Power and cooling

•Powersupply:DCfeed(-48-VDC

nominal)

•Powersupply:-65-V

•Powerconsumption:upto2000W

•Cooling:forcedair

Environment

•Operatingtemperature:

-5°Cto+45°C(23°Fto113°F)

•Relativehumidity:0%to90%,

non-condensed

Regulatory compliance

•CEcertification

•Operatingconditions:

ETS 300 019, Class 3.2

•Storageconditions:

ETS 300 019, Class 1.2

•Transportationconditions:

ETS 300 019, Class 2.2

•Electrostaticdischarge(ESD)/elec-

tromagneticcompatibility(EMC):

ETS 300 386 “Telecommunications

Center”