A SERVICE OF

logo

Open as PDF
next previous
Aggregated Links
25
Aggregated Link
Example
The example shown in Figure 3
illustrates an 2 Gbps aggregated link
between two Switch units.
Figure 3
A 2 Gbps aggregated link between two Switch units
To set up this configuration:
1
Add the 1000BASE-T ports on the upper unit to the aggregated link.
2
Add the 1000BASE-T ports on the lower unit to the aggregated link.
3
Connect the 1000BASE-T port marked ‘Up’ on the upper Switch to the
1000BASE-T port marked ‘Up’ on the lower Switch.
4
Connect the 1000BASE-T port marked ‘Down’ on the upper Switch to
the 1000BASE-T port marked ‘Down’ on the lower Switch.
Switch
Switch
2 Gbps Aggregated Lin
k