Filter
Top Products
4
Specifications
Power Requirements
120VAC 60 Hz
725 Watts Maximum
230VAC 50 Hz
725 Watts Maximum
Power Amplifiers (internal)
2 X 300 Watts @ 4-Ohms
Frequency response (subs)
X-over switch at top 40Hz - 100Hz // Satellite = 40Hz - 20kHz
X-over switch at mid 40Hz - 125Hz // Satellite = 110Hz - 20kHz
X-over switch at btm 40Hz - 150Hz // Satellite = 150Hz - 20kHz
Input Connections
Input: 1x 1/4", 1x XLR // Output: 1x 1/4"
Tip: Positive Ring: Negative
Sleeve: Optional (see "Grounding")
Grounding
The sleeves of the 1/4" inputs & pin 1 of the XLR are not grounded except when
the GROUND LIFT pushbutton is set to GND. Then grounding is done through a 10
Ohm protection device in order to prevent damage due to miswiring.
Speakers
2x10", 8 ohms, 150 watts, 2" VC, foam-suspended high-excursion cones
Performance
Max. S.P.L.: 124dB over 50-120Hz with
C weighting and bandpass pink noise @ 1/3 octave
Weight:
79lbs. (36kg.)
Dimensions:
(HxWxD): 19.8" x 22.5" x 22.0"
50.3 x 57.1 x 55.9 cm
PS210PX
POWERED SUBWOOFER