Filter
Top Products
English
Specifications
Type Active Servo Processing Subwoofer
System
Amplifier output 25 W/4 Ω (THD 10%, 100 Hz)
High-Cut Filter Low, High
Pressure Level 98 dB (max.)
Capacity 8.0 l
Frequency response 35 to 250 Hz (–10dB)
Speaker unit 6.3" (16 cm) cone woofer, magnetic
shielding
Power supply AC 120 V, 60 Hz
Power consumption 25 W
Dimensions (W × H × D) 280 (11") × 200 (7.9") × 248.5 (9.8") mm
Weight 5.5 kg (12.1 lbs)
Accessories Mini plug cable × 1
RCA pin to Mini plug adaptor × 1
1/4" Phone to Mini plug adaptor × 1
* Specifications subject to change without notice.
Controls
Front Panel (Refer to page 2)
4 POWER Switch and Indicator: Press to power on the
YST-MSW10; the power indicator will light up. Press again to
power off. Before powering on and off, turn down the VOLUME
control.
5 HIGH CUT Switch: This switch selects the high-cut filter
frequency: Set it to either LOW or HIGH.
6 VOLUME Control: Use this control to set the volume level. Turn
it clockwise to increase the volume, and counterclockwise to
reduce it.
Auto Power On/Off Function
When powered on, if no input signal is received after 5–10
minutes, the power is switched off automatically. When an input
signal is received, the power is switched back on automatically.
This function works only when the power switch is in the on
position.
4