Filter
Top Products
Inserting the Caddy into CDR100/102 13
Yamaha CDR100/102
3. Push the caddy carefully in until CDR100/102
accepts it.
The DISC indicator flashes while the caddy is loading, and
while the disc is being checked. It remains lit once the disc has
been loaded successfully.
If the disc is not loaded in the caddy correctly, or the caddy
does not contain a disc, the DISC indicator stops flashing and
the caddy is ejected.
When the caddy has loaded successfully, it takes about 20
seconds before the CDR100/102 is ready for use. When
adding new data to a multisession disc, it may take several
minutes before CDR100/102 responds to commands from the
host computer.
Note:
Do not attempt to insert the caddy while the X2 and X4
indicators remain on after performing a reset. If you insert
the caddy too soon, it may get caught by the mechanism. If it
does, it will eject automatically after a while. Once this
happens, make sure that you power off CDR100/102, then
power on before proceeding. You may need to power down
your system before powering down CDR100/102. Consult
your system dealer.