Filter
Top Products
19
English
1 Multi-information display
Displays various information, for example station frequency,
preset station number and name of selected input source.
2 MEMORY indicator
When the MEMORY button is pressed, this indicator flashes
for about 5 seconds. During this period, the displayed station
can be programmed to the memory by using the A/B/C/D/E
button and the preset station number selector buttons.
3 AUTO (TUNING) indicator
Lights up when this unit is in the automatic tuning mode.
4 TAPE MONITOR indicator
Lights up when the tape deck (or MD recorder etc.) is selected
as the input source by pressing the TAPE (MD) MON button.
5 STEREO indicator
Lights up when an FM stereo broadcast with sufficient signal
strength is received.
6 Signal-level meter
Indicates the signal level of the received station.
If multipath interference is detected, the indication decreases.
7 Center channel mode indicators
The name of a selected center channel mode lights up only
when a program which uses the Dolby Pro Logic Surround
decoder is selected.
8 DSP and PRO LOGIC indicators
RX-V692 only
“DSP” lights up when the built-in digital sound field processor
is on, and “ PRO LOGIC” lights up when the built-in Dolby
Pro Logic Surround decoder is on. Both indicators light up
when the digital sound field processor and the Dolby Pro Logic
Surround decoder are on.
9 SLEEP indicator
Lights up while the built-in SLEEP timer is functioning.
0 EFFECT OFF indicator RX-V592 only
Lights up if neither the digital sound field processor nor the
Dolby Pro Logic Surround decoder is on. In this state, sound
output is 2-channel stereo.
A DSP program indicators RX-V592 only
The name of a selected DSP program lights up when the built-
in digital sound field processor and/or the Dolby Pro Logic
Surround decoder is on.