Yamaha RX-V596 Stereo System User Manual


 
44
Description of Each Position
TAPE/MD position
The dark-shaded buttons do not function.
If your component does not respond to any of the codes listed for the manufacturer, use the original remote control
supplied with your component.
PRESET REMOTE CONTROL
Select the TAPE/MD position.
r REC/PAUSE
This button gives a pause in recording on a
tape deck or MD recorder.
p PLAY
This button plays a tape or an MD.
b DIR A (TAPE)
This button selects the playing direction of
deck A.
SKIP– (MD)
This button skips to the beginning of the
previous track.
w REWIND (TAPE)
This button rewinds a tape.
SEARCH (MD)
This button initiates a backward search on the
track that is playing to find the point from
which you want to listen.
Numeric buttons (MD)
+10 (MD)
While the indicator lights up for about three
seconds after pressing DSP, this button turns
on or off the effect speakers (center and rear).
DECK A/B (TAPE)
This button selects deck A or B on a double-
cassette tape deck.
DISPLAY (MD)
e PAUSE (MD)
This button gives a pause in operation.
a DIR B (TAPE)
This button selects the playing direction of
deck B.
SKIP+ (MD)
This button skips to the beginning of the next
track.
s STOP
This button stops operation on a tape deck or
MD recorder.
f FAST FORWARD (TAPE)
This button winds a tape fast forward.
SEARCH (MD)
This button initiates a fast-forward search on
the track that is playing to find the point from
which you want to listen.
AV POWER
(TAPE) This button turns on the tape deck
that has a remote control with a power button
if you have set the code for another
manufacturer.
(MD) This button turns on the MD recorder
that has a remote control with a power button
if you have set the code for another
manufacturer.
0109V596(UCA)42-49_EN 3/1/0, 1:20 PM44