Filter
Top Products
44
■ AMP/TUN Note: TV POWER and TV VOLUME function if you have preset the code for your TV.
1 POWER
This button turns the unit on.
2 INPUT
Press one of these buttons to select the required input source.
3 EXT. DEC.
Press this button when using an external decoder.
4 A/B/C/D/E
Press this button to select a group of preset stations.
5 DSP
Press this button. While the indicator is lit up for about three
seconds, select a DSP program by using the number buttons (1
to 8). No DSP program can be selected after the indicator goes
off.
6 PRESET (+/–)
Press these buttons to select the preset station number.
7 VOLUME ( )
Press these buttons to adjust the volume level.
8 MUTE
Press this button to mute the sound. To cancel mute, press this
button once more, or press the operation buttons of this unit.
9 SLEEP
Press this button to set the SLEEP timer.
0 (LEFT), (RIGHT)
These buttons are used to adjust the settings of the SET MENU
mode and the TIME/LEVEL mode.
q TIME/LEVEL
Press this button to set the unit in the TIME/LEVEL mode and to
select the item.
w STANDBY
Press this button to set this unit in the standby mode.
e TEST
Press this button to output a test tone for adjusting the output
level of the speakers.
r EFCT (EFFECT) ON/OFF
Press this button to turn on or off the DSP program which
includes the Dolby Pro Logic decoder, the Dolby Digital
decoder and the DTS decoder.
t (NEXT), (BACK)
These buttons are used to advance or go back one selection in
the SET MENU mode and TIME/LEVEL mode.
y SET MENU
Press this button to set the unit in the SET MENU mode and to
select functions.
2 DSP program
Press one of these buttons to select the required DSP program
(1 to 8). When you select the input source, set the SELECTOR
DIAL to the AMP/TUN position.
Note: The function of all buttons other than DSP program is
the same as that with the AMP/TUN position.
w
1
2
3
7
5
4
8
9
r
e
y
t
q
0
6
2
■ DSP
Indicator:
Flashes in red
when the button
is pressed.
Indicator window:
Displays the names of
components which
can be controlled.
SELECTOR DIAL:
Selects the
position for the
component to be
controlled.
The lightly marked buttons do not function.
TV VOLUME
TV POWER
01RX-V595a-e/f6 6/24/99, 11:45 AM44