Filter
Top Products
50
REMOTE CONTROL FEATURES
MACRO
MACRO
LEARN
TRANSMIT
RE-NAME
STANDBY
SYSTEM
CLEAR LEARN MACRO
OFF ON
MACRO
PHONO
A
B
CD
DVD
VCR2/DVR
VCR 1
D-TV/LD
CBL/SAT
CD-R
MD/TAPE
TUNER
V-AUX
POWER
LEARN
PHONO
A
B
CD
DVD
VCR2/DVR
VCR 1
D-TV/LD
CBL/SAT
CD-R
MD/TAPE
TUNER
V-A UX
■ Clearing a macro function
1 Press MACRO to clear a programmed macro
by using a ballpoint pen or similar object.
Note
• Complete each of the following steps in 30 seconds. Otherwise
the learning mode will be automatically canceled. In this case,
press MACRO again.
2 Press and hold CLEAR by using a ballpoint
pen or similar object, then press the button
for which you want to clear the macro for
about 3 seconds.
“C:OK” appears in the display window.
y
• You can clear other learned functions and macros at this time
by holding down CLEAR again and pressing the other buttons
for which those learned functions or macros have been
programmed.
Note
•“C:NG” appears in the display window if the operation is
unsuccessful. In this case, try step 2 again.
3 Press MACRO again to exit from the clearing
mode.
Once you have cleared macro for a button, the button
reverts to the factory setting.
TRANSMIT
RE-NAME
STANDBY
SYSTEM
CLEAR LEARN MACRO
OFF ON
MACRO
PHONO
A
B
CD
DVD
VCR2/DVR
VCR 1
D-TV/LD
CBL/SAT
CD-R
MD/TAPE
TUNER
V-AUX
POWER
Clearing a Learned Function
You can clear the function learned in a certain
programmable button in each area.
1 Press an input selector button, Å or ı to
select the source component you want to
clear the function.
The selected component name appears in the display
window.
2 Press LEARN by using a ballpoint pen or
similar object.
“LEARN” and the selected component name appear
alternately in the display window.
Note
• Complete each of the following steps in 30 seconds. Otherwise
the learning mode will be automatically canceled. In this case,
press LEARN again.
3 Press and hold CLEAR by using a ballpoint
pen or similar object, then press the button
for which you want to clear the function for
about 3 seconds.
“C:OK” appears in the display window.
4 Press LEARN again to
exit.
Once you have cleared a learned function for a
button, the button reverts to the factory setting.
0108V2300_43-56_EN(U) 02.8.9, 10:38 AM50