Filter
Top Products
E-8
ZONE 2 CONNECTIONS
You can make up a multi-room audio-video system with this unit. This feature enables you to set this unit to reproduce
separate input sources in the main room and second room (Zone 2) with the supplied remote control in the second room.
To use the multi-room functions of this unit, you need the following additional equipment:
• An infrared signal receiver in the second room
• An infrared emitter in the main room
This emitter transmits the infrared signals from the remote control in the second room to the main room
(for example, to a CD player or LD player).
• An amplifier and speakers for the second room
• A video monitor for the second room
OUT IN OUT IN OUT IN
REMOTE CONTROL
y
• Since there are so many ways to connect and use this
unit in a multi-room installation, we recommend that
you consult with the nearest authorized YAMAHA
dealer or service center for the Zone 2 connections
which will best meet your requirements.
• Some YAMAHA models are able to connect directly
to the REMOTE CONTROL OUT terminal of this
unit. If you own these products, you may not need to
use an infrared emitter. Up to 6 YAMAHA
components can be connected as shown.
This unit
■ Example of a system configuration and connections
REMOTE CONTROL OUT REMOTE CONTROL IN
ZONE 2 VIDEO OUT
ZONE 2 AUDIO OUT
Main room
DVD player
(or other component)
This unit
Infrared emitter
Second room
Amplifier
Video
monitor
Remote control
(in the Zone 2 mode)
Infrared signal receiver