Filter
Top Products
E-6
CONNECTIONS
Caution: Plug in the subwoofer and other audio/video components after all connections are
completed.
● Connect the main, center and rear speakers to the
speaker output terminals of your amplifier with the
provided speaker cords.
* The provided speaker cords have labels marked
FRONT L, FRONT R, CENTER, REAR L or REAR R.
Connect each speaker cord to the corresponding
speaker by following the figure below.
* Connect each speaker making sure not to reverse the
polarity (+, –). If the speaker is connected with
reversed polarity, the sound will be unnatural and lack
bass.
* For the main and rear speakers only, connect one
speaker to the left (marked L) terminals of your
amplifier, and another speaker to the right (marked R)
terminals.
● The subwoofer can be connected to either the line output
(pin jack) terminals or the speaker output terminals of the
amplifier. Choose one of the ways shown in this section
that is more suitable for your audio system. Also, refer to
the owner’s manual of your component to be connected
to the subwoofer.
Ⅵ An example of basic connections
Basically, connect the subwoofer to the line output (pin jack) terminal(s) of the amplifier. (Refer to page 8 for details.) If your
amplifier does not have any line output terminal, connect the subwoofer to the speaker output terminals of the amplifier. (Refer
to page 9 for details.)
LeftRight
Subwoofer (General model)
Amplifier
To AC outlet
Center speaker
Rear speakers
Left
Right
Main speakers
General information for connections
SPEAKERS
MAIN CENTER REAR
(SURROUND)
OUTPUT
SUB
WOOFER
CAUTION
SEE INSTRUCTION
MANUAL FOR CORRECT SETTING.
MAIN
A
B
A
B
CENTER REAR
(SURROUND)
OUTPUT INPUT2
TO SPEAKERS
INPUT1
FROM AMPLIFIER
LOW
HIGH
OFF
AUTO
STANDBY
240V
VOLTAGE
SELECTOR
POWER
ON
OFF
OUTPUT INPUT2
TO SPEAKERS
INPUT1
FROM AMPLIFIER
LOW
HIGH
OFF
AUTO
STANDBY
REAR L
REAR L
FRONT R
FRONT R
FRONT L
FRONT L
CENTER
REAR R
CENTER
REAR R