Yamaha MS202II Speaker User Manual


 
2
Front Panel
1
POWER Switch & Indicator
Press this switch to power on the MS202
II
. Press again to
power off. The power indicator will light up when the power
is on
2
LOW control
Turn this control clockwise to boost low frequencies and
counterclockwise to reduce them.
3
HIGH control
Turn this control clockwise to boost high frequencies and
counterclockwise to reduce them.
4
MASTER Volume
This control can adjust the overall volume level (MIC and
LINE inputs).
5
MIC Volume
This control can adjust the volume level of a microphone
connected to the MIC INPUT jack. If MASTER Volume is
turned all the way down, the mic will not be heard.
6
MIC INPUT
A dynamic type microphone can be connected to this
1/4 inch phone jack.
7
LINE 1, 2 INPUT
Electronic musical instrument such as home keyboard can
be plugged directly into these inputs.
8
LINE OUT
The combined signals from LINE 1, 2, 3 INPUT and MIC
INPUT can be put out from this 1/4” phone jack. You could
connect this LINE OUTPUT to a tape recorder input to be
recorded, or to another powered speaker system for fur-
ther amplification. The output signal level is not affected by
the MASTER Volume level.