Filter
Top Products
26
CONNECTIONS
If you are to use 4 or 6 ohm speakers, set “SP
IMP.” to “6ΩMIN” as follows BEFORE using this
unit.
1 Make sure this unit is set to the standby
mode.
See page 27 for details about turning on this unit or
setting it to the standby mode.
2 Press and hold STRAIGHT (EFFECT) on the
front panel and then press STANDBY/ON to
turn on this unit.
This unit turns on, and the advanced setup menu
appears in the front panel display.
3 Press PROGRAM l / h on the front panel
repeatedly to select “SP IMP.”.
The following display appears in the front panel
display.
4 Press STRAIGHT (EFFECT) on the front
panel repeatedly to select “6ΩMIN”.
The following display appears in the front panel
display.
5 Press STANDBY/ON on the front panel to
save the new setting and set this unit to the
standby mode.
The setting you made is reflected next time you turn on this
unit.
Setting the speaker impedance
CAUTION
VOLUME
AUTO/MAN'LMAN'L/AUTO FMLEVELNEXTEDIT
EFFECT
MEMORY
FM/AMPRESET/TUNING
A/B/C/D/E
l
PROGRAM
h
BASS/TREBLE
TUNING MODE
INPUT MODE
TONE CONTROL
STRAIGHT
SPEAKERSPHONES
SILENT CINEMA
STANDBY
/ON
BA
MULTI CH
INPUT
INPUT
SEARCH MODE
CATEGORY
l
PRESET/TUNING/CH
h
DISPLAY
VIDEO PORTABLEL AUDIO R
VIDEO AUX
32,4
2,5
(U.S.A. model)
EFFECT
STRAIGHT
STANDBY
/ON
While holding
down
l PROGRAM h
SP IMP.-8 MIN
Note
EFFECT
STRAIGHT
SP IMP.-6 MIN
STANDBY
/ON