Filter
Top Products
14
1
2 Turn the unit into the PS mode.
* If “NO PS” flashes, proceed to the next step while flashing.
If “NO PS” disappears before you proceed to the next step,
press the FREQ/PS/PTY button again.
3
4 Select the first letter or numeral of the station name.
* By pressing the TUNING UP or DOWN button repeatedly or
by pressing and holding either of them, the display will
change letters and numerals in sequence.
* If you will not input the second letter, skip to step 7.
5 When the first letter or numeral of the station name
appears, press the SHIFT/EDIT button to proceed to the
selection of the next letter or numeral.
6 Repeat steps 4 and 5 for other letters and/or numerals,
if necessary.
7 When inputting the name is finished, press the
ENTER/KEY MODE button.
8
The unit begins searching for the station, and it is
continued until the station is found.
You do not have to input a full name for searching
for the station
You may input only the first letter of the station name. If doing
so, you can skip steps 5 and 6. In step 8, the unit searches
for and calls a nearest station which has the letter you input. If
the station is not the desired one, press the TUNING UP or
DOWN button again. The unit will begin searching for another
station which has the same letter.
To cancel this function
Press the AF, FREQ/PS/PTY, SHIFT/EDIT, ENTER/KEY
MODE, FM/AM or MEMORY button.
Note
This function is not useful for calling a station with weak
signals which cannot be received by the automatic tuning
method.
Calling a preset RDS station by the station name (PS SEEK)
You can call a desired RDS station stored in this unit by only inputting the name of the station in the PS mode. By this operation,
this unit searches all preset stations for the station. You do not have to input a full name, even only the first letter can be used for
calling. As many as 8 letters and/or numerals can be selected for inputting a name.
FM/AM
ENTER/
KEY MODE
PS/PTY/SEEK
SHIFT/
EDIT
FREQ/PS/PTY
A station name is
displayed or “NO PS”
flashes.
“A” will flash on the second
letter or numeral position.
The name is
illuminated.
Flashes
ENTER/
KEY MODE
PS/PTY/SEEK
SHIFT/
EDIT
FREQ/PS/PTY
ENTER/
KEY MODE
PS/PTY/SEEK
SHIFT/
EDIT
FREQ/PS/PTY
ENTER/
KEY MODE
PS/PTY/SEEK
SHIFT/
EDIT
FREQ/PS/PTY
ENTER
DOWN UP
PRESET STATIONS
TUNING
DOWN UP
PRESET STATIONS
TUNING
Press once.
2 7
1 4, 8
3, 5