Filter
Top Products
4 En
OPERATIONS
Automatic tuning is effective when station signals are
strong and there is no interference.
1 Press FM/AM repeatedly to select the
reception band (FM/AM).
2 Press TUNING MODE to select “Auto tune”.
3 Turn PRESET/TUNING to begin automatic
tuning.
When this unit is tuned into a station, the TUNED
indicator lights up and the frequency of the station is
shown on the front panel display.
y
If the station provides Radio Data System information, the
program service information will be shown on the front panel
display.
If the signal from the station you want to select is weak,
tune into it manually.
1 Press FM/AM repeatedly to select the
reception band (FM/AM).
2 Press TUNING MODE repeatedly to select
“Manual tune”.
3 Turn PRESET/TUNING to select the desired
frequency.
When this unit is tuned into a station, the TUNED
indicator lights up.
You can tune into any desired station simply by selecting
the preset station number.
See the next page to preset stations.
1 Press TUNING MODE repeatedly to select
“Preset tune”.
2 Turn PRESET/TUNING to select the desired
preset station number.
■ Improving FM reception
If the signal from the station is weak and the sound quality
is not good, set the FM radio wave reception mode to the
monaural tuning mode to improve reception.
Press FM MODE repeatedly to select “AUTO
STEREO” (stereo mode) or “MONO” (monaural
mode) when this unit is tuned into an FM radio
station.
• When this unit is in the stereo tuning mode, the
STEREO indicator lights up on the front panel display.
• When this unit is in the monaural tuning mode, the
STEREO indicator goes off.
Even if this unit is in the stereo tuning mode, the STEREO
indicator does not light up when the current program is monaural.
TUNING
Automatic tuning
Manual tuning
p Auto tune [
FM 87.50MHz
FM 94.90MHz
pManual tune[
FM 87.50MHz
Selecting preset stations
Note
Note