Filter
Top Products
CONNECTING TO LINE OUTPUT (PIN JACK) TERMINALS OF THE AMPLIFIER
• Leave the main speakers connected to the amplifier.
• Amplifier line output terminals are generally labeled PRE OUT or SUBWOOFER OUT.
* For PRE OUT terminal connection, the amplifier must possess at least two sets of PRE OUT terminals. With some amplifiers
with only one set of PRE OUT terminals, connection can result in no sound from the main left and right speakers. In this case,
select the method of connecting to the speaker terminals.
• To connect with a YAMAHA DSP amplifier, connect the LOW PASS (or SUBWOOFER etc.) terminal on the rear of the DSP
amplifier to either the left (L) or right (R) INPUT 2 terminal.
To connect one unit only
To connect two units
Notes
• When connected to line output terminals of the amplifier, other speakers should not be connected to the OUTPUT terminals on
the rear panel of this unit. If connected, they will not produce sound.
• When connecting to a monaural line output terminal of the amplifier, connect to either the left or right INPUT 2 terminal.
8
INPUT1INPUT2
FROM AMPLIFIER
OUTPUT
TO SPEAKERS
ONOFF
AUTO
POWER
HIGH CUT
STANDBY
-
RED
ON
-
GREEN
VOLUME
150 Hz
010
50 Hz
POWER
OFF
ON
INPUT1INPUT2
FROM AMPLIFIER
OUTPUT
TO SPEAKERS
PRE OUT
LOW PASS
INPUT1INPUT2
FROM AMPLIFIER
OUTPUT
TO SPEAKERS
ONOFF
AUTO
POWER
HIGH CUT
STANDBY
-
RED
ON
-
GREEN
VOLUME
150 Hz
010
50 Hz
POWER
OFF
ON
INPUT1INPUT2
FROM AMPLIFIER
OUTPUT
TO SPEAKERS
ONOFF
AUTO
POWER
HIGH CUT
STANDBY
-
RED
ON
-
GREEN
VOLUME
150 Hz
010
50 Hz
POWER
OFF
ON
PRE OUT
INPUT1INPUT2
FROM AMPLIFIER
OUTPUT
TO SPEAKERS
INPUT1INPUT2
FROM AMPLIFIER
OUTPUT
TO SPEAKERS
This unit
Pin plug cords
<YAMAHA DSP amplifier>
<
Amplifier>
Right speakerLeft speaker
Amplifier
To AC outlet
This unit This unit
Pin plug cords
Right speakerLeft speaker
Amplifier
To AC outlet To AC outlet