Filter
Top Products
11
English
Display panel
DIGITAL
PRO LOGIC
DSP
CD
TUNER
PHONO
TAPE/MD
MONITOR
DVD/LD
TV/DBS
V-AUX
VCR
SLEEP
PS PTY RT CT
ENHANCED MOVIE THEATER 12 TV SPORTS
MONO MOVIE DISCO JAZZ CLUB
ROCK CONCERT CHURCH CONCERT HALL
MEMORY
PTY HOLD
EON
NEWS INFO AFFAIRS SPORT
AUTO
0 20 100
STEREO
1324
56 7
8 9 A0BC EFD
1 indicators
Either “dts” indicators will be illuminated when the built-in DTS
decoder is turned on.
A red “dts” indicator will be illuminated when playing a compact
disc or laserdisc encoded with DTS.
An orange “dts” indicator will be illuminated when playing a
DVD encoded with DTS.
An orange “dts” indicator may be illuminated when playing a
laserdisc encoded with DTS after a video-CD or DVD on a
DVD/LD combi-player.
2 DSP program indicators
The name of the selected DSP program will be illuminated in
the following cases.
• When the tuner is selected as the input source.
• When a DSP program parameter is selected or adjusted.
• When the DSP program No. 2, 3 or the subprogram
“Enhanced” of No. 1 is selected.
There is no illumination here when no DSP program is
selected.
3 Multi-information display
This display shows the current DSP program and the status of
adjustments and setting changes. Several statuses can be
viewed at one time. The current station frequency and band
(AM or FM) will also appear when the tuner source input mode
is selected.
4 Input source indicators
One of the arrows for these indicators will be illuminated
depending on which source is selected.
5 DIGITAL and PRO LOGIC indicators
The DIGITAL indicator will be illuminated when the built-in
Dolby Digital decoder is on and the signals of the source
encoded with Dolby Digital are not 2-channels.
The PRO LOGIC indicator will be illuminated when the
built-in Dolby Pro Logic decoder is on.
6 DSP indicator
This indicator will be illuminated when the built-in digital sound
field processor is on.
7 MEMORY indicator
A flashing MEMORY indicator means a station can be saved,
as explained in the following:
Press the MEMORY button. The MEMORY indicator will flash
about 5 seconds. While the indicator is flashing, program the
displayed station to memory by using the A/B/C/D/E and the
preset station number selector buttons.
8 RDS mode indicators
The name(s) of the RDS mode(s) employed by the currently
received RDS station is (are) illuminated. Illumination of the
indicator on the head of a name shows that the corresponding
RDS mode is now selected.
9 PTY HOLD indicator
This indicator will be illuminated while the search is performed
in the PTY SEEK mode.
0 EON indicator
This indicator will be illuminated when an RDS station that
employs the EON data service is received.
A Program type name indicators
The name selected in the EON mode is illuminated.
B AUTO indicator
This indicator will be illuminated during the automatic tuning
mode.
C STEREO indicator
This indicator will be illuminated when an FM stereo broadcast
with sufficient signal strength is received.
D Signal-level indicator
This indicator shows the signal level of the received station. If
multipath interference is detected, the indication decreases.
E TAPE/MD MONITOR indicator
This indicator will be illuminated when the tape deck (or MD
recorder etc.) connected to the TAPE/MD IN and OUT
terminals on the rear of this unit is selected as the input source
by pressing the TAPE/MD MON/EXT. DECODER button.
F SLEEP indicator
This indicator will be illuminated when the built-in SLEEP timer
is on.
GETTING STARTED