Filter
Top Products
English
27
BASIC
OPERATION
The display cycles as follows each time you press q/
DTS SUR :
PRO LOGIC→PRO LOGIC Enhanced→PRO LOGIC II
Movie→PRO LOGIC II Music→Neo:6 Cinema→Neo:6
Music→PRO LOGIC→....
y
• You can select PRO LOGIC, PRO LOGIC Enhanced, PRO
LOGIC II Movie, PRO LOGIC II Music, Neo:6 Cinema, and
Neo:6 Music by pressing PROGRAM l / h on the front
panel repeatedly.
■ Playing Dolby Digital EX or DTS ES
material
Press 6.1/5.1 to turn on the Dolby Digital EX or DTS ES
decoder to listen to Dolby Digital EX and DTS ES
material with a rear center speaker.
Press 6.1/5.1 to choose the playback mode. (The modes
you can select vary depending on the format of the
material you are playing.)
AUTO: This mode automatically switches to Dolby
Digital EX/DTS ES Matrix 6.1/DTS ES
Discrete 6.1 depending on the signal in the
input source that the unit detects. The rear
center speaker does not output sound for 5.1
channel sources.
Discrete 6.1: This mode can only be selected only when
the unit detects a source encoded with the
DTS ES Discrete format. (The DISCRETE
indicator lights up.)
Matrix 6.1: This mode allows for 6-channel playback of
the input source through the Matrix 6.1
decoder. (Either
EX
or MATRIX
indicator lights up.)
OFF: The rear center speaker does not output
sound in this mode.
Notes
• Some 6.1-channel compatible discs do not have a signal (flag)
that this unit can automatically detect. Select “Matrix 6.1” to
play these kinds of discs with 6.1-channel sound.
• 6.1-channel playback is not possible even if you press 6.1/5.1
in the following cases:
1 When “1C REAR LR” is set to NON.
2 When effects are turned off.
3 When the source connected to the 6CH INPUT jack is
being played.
4 When the unit is reproducing a Dolby Digital KARAOKE
source.
5 When headphones are connected to the PHONES jack.
• The input mode resets to AUTO when you turn the unit power
off.
■ Selecting PRO LOGIC, PRO LOGIC II or
Neo:6
You can listen to 2-channel sources decoded into five or
six discrete channels by selecting PRO LOGIC, PRO
LOGIC II or Neo:6 in program No. 9.
1 Select a 2-channel source and start playback
on the source component.
2 Press AMP to set the
remote control in AMP
mode.
3 Press q/DTS SUR.
AMP
OPTICALRAUDIOLVIDEOS VIDEO
EFFECT
PRESET/TUNING
A/B/C/D/E
PROGRAMSTEREOSPEAKERS
BA
PHONES
TREBLEBASS
VIDEO AUX
SILENT
STANDBY
/ON
SET MENU
NEXT
PROGRAM l / h
DISC SKIP
POWER
TV
AMP
REC
AUDIO
VOL
TV INPUT
SET MENU
A/B/C/D/E
LEVEL
TITLE
TV VOL
TV VOL
TV MUTE
SELECT
MENU
MUTE
CH
TEST
ON SCREEN
STEREO
EFFECT
DISPLAYRETURN
CH
PRESET PRESET
HALL JAZZ CLUB
ROCK
CONCERT
ENTER-
TAINMENT
MUSIC
VIDEO
TV
THEATER
MOVIE
THEATER 1
MOVIE
THEATER 2
/DTS
SUR.
1234
5678
9101112
NIGHT
6.1/5.1
0
CHP/INDEX
+
10
POWER
AV
3
2
HALL JAZZ CLUB
ROCK
CONCERT
ENTER-
TAINMENT
MUSIC
VIDEO
TV
THEATER
MOVIE
THEATER 1
MOVIE
THEATER 2
/DTS
SUR.
1234
5678
9101112
NIGHT
6.1/5.1
0
CHP/INDEX
+
10
12
6.1/5.1
CHP/INDEX
(Example)
PLAYBACK
V-AUXVCR1
VCR2/DVR
D-TV/CBL
DVD
MD/CD-R
TUNER CD PHONO
MATRIX
ES
A
SP
VOLUME
LCR
RLLFE RR
Matrix 6.1
V-AUXVCR1
VCR2/DVR
D-TV/CBL
DVD
MD/CD-R
TUNER CD PHONO
PL
A
SP
VOLUME
L R
PRO LOGIC
0105RX-V740_23-28_EN-U.p65 03.1.10, 6:31 PM27