Filter
Top Products
26
Adjustment of the REAR LEVEL
If desired, you can adjust the sound output level of the rear
speakers even if the output level is already set in “SPEAKER
BALANCE ADJUSTMENT” on page 15.
To operate on the front panel
1
2
Press “+” or “–” before “REAR”
disappears from the display.
To operate on the remote control transmitter
Simply press the REAR LEVEL “+” or “–” key.
By continuously pressing “+” or “–”, the level value changes
continuously. However, the value stops changing momentarily
at the preset point (80).
●
Once the output level is adjusted, the level value will be the
same in all the digital sound field programs.
●
If DOLBY PRO LOGIC or a digital sound field program is
not used, this adjustment cannot be made.
* The following adjustments can be done on the remote control transmitter as well as on the front panel.
If desired, you can adjust the sound output level of the center
speaker even if the output level is already set in “SPEAKER
BALANCE ADJUSTMENT” on page 15.
To operate on the front panel
1
2
Press “+” or “–” before “CENTER”
disappears from the display.
To operate on the remote control transmitter
Simply press the CENTER LEVEL “+” or “–” key.
By continuously pressing “+” or “–”, the level value changes
continuously. However, the value stops changing momentarily
at the preset point (80).
●
If the digital sound field program STADIUM, ROCK
CONCERT, JAZZ CLUB, CHURCH or CONCERT HALL is
selected, this adjustment cannot be made.
●
Once the output level is adjusted, the level value will be the
same in all the programs except mentioned above.
●
If a digital sound field program is not used, this adjustment
cannot be made.
Adjustment of the CENTER LEVEL
CENTER
Adjustable
LEVEL
REAR
Adjustable
LEVEL